Print this page | Close this window     


SAM MECH ENGINEERING


SAM MECH PRODUCT DESIGN SAMPLES


  • Engine Lifter
  • Suspension Lifter
  • Roller and Skid Conveyors
  • Valve Rack & HFO Unit
  • Traction Bed
  • ADT Dashboard
  • Wood Shaving Machine
  • Reel Mower

  • SAMY Laser Diamond Cutter
  • Automated Polishing Machine
  • Doctor Rewinder
  • 2D Wire Bending Machine
  • Vehicle Drier
  • Dove Tailer
  • Collating and Packaging Machine

SAMY Laser Diamond Cutter


The SAMY Laser diamond cutter is controlled by the “ADVANTAGE 400 Pack” for a system up to 5 axis. +/-10V as well as stepper output is available. The system is based on the powerful PMAC2 axis controller. The Pack version of the Advantage 400 has no operator panel but in the SAMY system a Visual Basic Developed User interface on a Windows XP Professional Platform is used for all Parameter control and storage, while all Cutting control is performed directly and independently by the Motion controller.

The System comes standard with a color digital Camera incorporated into the Laser Beam Delivery and displayed on the User interface Computer. All Cutting positional set-up and laser focusing is done by with the camera.

The Motion Controller is interfaced to 3 (optional4) Allen Bradley 3Ph Servo Motors through the Allen Bradley single Phase Servo Drive. A X/Y table with standard travel of X100mm and Y200mm and Z stage of 50mm travel is supplied with the System with 1um Resolution. An external Hand wheel Encoder and Axis selector is used for simple axis manipulation. An additional Rotation stage offered as a option.


The Laser is a Laser SOS Q-Switched Diode Pumped NdYag water cooled (Internal Closed Loop only) Single phase laser system Giving around 10WTemoo CW. The Standard system comes with a fully enclosed work area with three OD6+ rated laser safety windows for Front, Side and Back access to the work area. The Standard unit comes without door interlocks generating a Class4 laser product which can be changed to a Class1 laser with the simple inclusion of the optional Door switches. The Laser is fully controlled by the user from the Control computer. Spare interposing relays are supplied standard on the system for user defined I/O expansion.


Total System Power Requirements is 240VAC (single Ph) 16A max with only External Compressed air required for the Jig clamp (option) and Air nozzle (incorporated into beam delivery). The system is delivered as a Plug and Play System Requiring only Beam Alignment and User training.
The SAMY Laser system comes standard with Groove optimised parameters for Sawing for optimal Weight loss and Sawing time with a groove angle of around 2 Degrees. All groove parameters are available to the user to be manipulated for personal requirements.


Multiple Sawing program allows the operator to set up to 20 cuts for automatic sawing without user intervention.
Table rounding and Rotation rounding programs as well as Shaping programs for Heart, Pear, Marquise, Trilliant, Triangle, Rectangle, Taper and Oval are also standard on the system.
User Specific Programs can easily be added to the system using the User programs function.

View the Particle Solid Interactions Group (PSI) of the Schonland Research Centre for Nuclear Sciences located at the University of the Witwatersrand write up on the Samy, follow the link below...

http://www.src.wits.ac.za/groups/psi/equip/laser.html


Automated Polishing Machine


The SAM APM is based on Coburn height adjustable skive controlled by a Weg variable speed drive to allow electronic breaking and speed control. The SAM spindle is lowered onto the skive by pneumatic control to a preset mechanical height.

Polishing pressure can be adjusted by adjusting the Coburn skive height. Polishing time is preset into the Beckhoff PLC. The polishing process can be paused for visual inspection and continued by the operator. The PLC provides additional error checking and interlocking during the polishing process.

The SAM ALM unit is provided as a self-contained Plug and play unit operating on a 380Vac(+-10%) 3 phase with Neutral and Earth supply. A 6 bar air supply is required for Pneumatic motion actuation.

The SAM ALM software is a Visual Basic based program that can be installed onto a standard Windows XP based (other systems not tested) operating system. SAM ALM is not required for polishing operation but is required to change system timers and is a handy tool for fault finding. The SAM ALM software requires the Beckhoff TwinCat CP system manager to be installed for successful communication.

The Automated polishing machine was specifically designed for the Element six sample laboratory. A PLC is integrated into the polishing control allowing remote access for programming and storage of the process variables. Automated shutdown allows polishing to be left overnight with safe shut down on completion.


The rotating floating head sample mounting jig allows for the even polishing of 3 diamond samples while spreading the polishing action over the whole polishing wheel surface for a smoother surface finish and longer wheel lifetime.


Please contact info@samkzn.co.za for detailed information and pricing.


Doctor Rewinder


The SAM MECH Doctor Rewinder is a economical rewinder/doctoring machine that is capable of running most flexible packaging materials. The machine can run in both directions and is fitted with an edge guide.

Specifications:

  • Overall Roller Length
  • Max. speed - 250m/min
  • Max. useable width - 600mm
  • Min. width - 250mm (depending on material)
  • Standard 76mm Expanding shafts
  • AC Drive technology
  • Optional inspection table

Please contact info@samkzn.co.za for detailed information and pricing.


2D Wire Bending Machine

Features: High accuracy using servo motors for feed and bending. Easy to configure using touch panel interface. Recipe management and access to recipes via the touch panel Tilting table to accommodate automatic butt welding attachment
&panel)

  • Wire Type Stainless Steel (800N/mm2)
  • Wire Diameter 2.5 mm - 6.5 mm
  • Maximum Feed Length 32 000 mm
  • Maximum Feed Speed 60 m/min
  • Standard 76mm Expanding shafts
  • Maximum Bend Angle +/- 180

Options:

  • Butt Welding Attachment
  • Larger motors for higher speeds

Please contact info@samkzn.co.za for detailed information and pricing.


Vehicle Drier


SAM designs, constructs and commissions custom made machines for the motor industry, an example of this is the water test bay drier that was constructed for a major vehicle manufacturer in Durban. The original drier, which was supplied when the water test bay was installed,  was in a bad state of disrepair and totally ineffective even after extensive modifications.

After a period of research and testing SAM designed a moving drier from scratch. SAM always aims for the simplest most elegant solution, using off the shelf components and preassemblies as far as possible.

We used 3D development tools such as AutoCAD Inventor® which allows the customer to  look and get a feel for the final product, before manufacturing starts. This gives the customers an “engineer’s feel” as to how the product will perform.

SAM factory acceptance tested the drier on time, exceeding the customer’s expectations and performance criteria.


The drier uses three large fans, blowing directly onto and around the body of the vehicle, w ith wind speeds recorded in excess of 300 km/h.
The mobile drier moves up and down the vehicle ensuring a touch dry effect. This method works much better than the previous air-knife type system.

The new drier was integrated into the customer’s existing control system.

This is just one example of a system custom built to customer’s unique requirements regarding costs, timelines, maintainability and reliability.

With SAM’s expert knowledge of control systems, drive systems, CNC, vision and all the latest innovations in the automation world, we are able to offer unique solutions where other traditional mechanical manufactures will shy away .

Please contact info@samkzn.co.za for detailed information and pricing.


Dove Tailer


The SAM MECH Wood profiling machine designed to machine male dove tail onto wooden parts loaded into magazines. Easy to configure and operate.

Easily interchangable blades 15 parts/min

Please contact info@samkzn.co.za for detailed information and pricing.

Collating and Packaging Machine


A high speed machine used to collate packs of food product and then seal bundles for loading into cardboard shippers.

  • 90 packs/min

Please contact info@samkzn.co.za for detailed information and pricing.

© 2013 Systems Automation & Management Pty Ltd.